Equipped with SEA&SEA’s new slave TTL system called “DS-TTL ll”
Revising the algorithms used for the DS-TTL system, the Sea and Sea YS-D1 Strobe employs a totally new slave TTL system. The strobe can adjust the interval between the pre flash and the primary flash in order to be compatible with a wide-variety of cameras, if not all, on the market today. The strobe is equipped with DS-TTL ll mode which is more responsive, more precise and more reliable. The DS-TTL ll enables a variety of strobe sync photography such as slave TTL and slave manual (11 steps) with compact or digital SLR cameras. When used with a digital SLR camera in housing, the strobe can also be connected with a conventional sync cord and through a YS Converter for TTL strobe photography. In a clear water environment, two Sea and Sea YS-D1 Strobe in DS-TTL ll mode provide perfect lighting. When you would like to emphasize contrast, setting the main strobe in DS-TTL II mode and the secondary strobe in manual mode (11 steps) offers flexibility without limiting control. When underwater visibility is poor, two Sea and Sea YS-D1 Strobes set to manual mode may produce the best images.
The Sea and Sea YS-D1 Strobe is the most versatile underwater strobe available today. The DS-TTL exposure compensation function enables subtle lighting control by adjusting the Light Level dial in DS-TTL mode.
Powered by only four AA batteries, the Sea and Sea YS-D1 Strobe offers a maximum light output of Guide Number 32
Compared to the YS-110Alpha, the YS-D1 is 1EV more powerful, 50g (1.8oz) lighter and 10% smaller. Not only is the Sea and Sea YS-D1 Strobe suitable for macro photography, but also is robust enough for wide-angle photography. it is also ideal for macro photography which requires delicate light level control. The strobe’s guide number can be reduced to 1. Highly versatile, the Sea and Sea YS-D1 Strobe offers more automatic and manual control over lighting to get that perfect exposure.
The Sea and Sea YS-D1 Strobe is the world’s first slave TTL strobe equipped with an exposure compensation (EV) control function
By controlling the actual flash light level, the strobe realizes accurate exposure compensation with EV value. Regardless of a compact or a SLR camera, you can achieve any desired exposure compensation. However, many TTL systems are not reliable. The YS-D1’s DS-TTL exposure compensation function allows users to adjust the light level in TTL mode (-1.5EV, -1EV, -0.7EV, -0.3EV, +0.3EV, +0.7EV, +1EV, +1.5EV).
A high-visibility three-colored LED indicator lamp is easy to read even during shooting
A red LED will be shown when the strobe has been charged and is ready to fire.TTL confirmation lamp
A green LED will be shown for two seconds to confirm DS-TTLll exposure.Slave TTL mode lamp
A blue LED will be shown when the strobe is set to Slave TTL mode and the strobe has been charged and is ready to fire.
Two accessory diffusers
In macro photography when a wide beam is not necessary, no diffuser should be attached. For an even strong circular 100×100 light output is desired, mount the Diffuser 100. When a wide-angle lens is used, the diffuser 120 should be attached. Three beam angles can be selected in accordance with the photographer’s requirements.
The Sea and Sea YS-D1 Strobe is equipped with a function that automatically switches modes between slave and conventional sync cord or vice versa
The Sea and Sea YS-D1 Strobe will auto-sense when a sync cord is connected, the slave ON/OFF switch will no longer be active. Simple controls and configuration enables easy operation. The light level control ratchets/clicks to aid in setting and operation.
Strobe mount can be selected
With the conventional YS adaptor, the strobe can be moved only upward and downward. However, with the Ball Mount, the Sea and Sea YS-D1 Strobe can be moved in a variety of angles.